2021

• Indirect Force Measurement Using Spindle Currents for Grinding Processes in Aerospace Industry
  A. Grimmert and P. Wiederkehr
  Proceedings of the Machining Innovations Conference for Aerospace Industry (MIC) 2021
  DOI: http://dx.doi.org/10.2139/ssrn.3936424

• A Synthesis-based Tool Path Planning Approach for Machining Operations
  T. Schäfer, J. A. Bergmann, R. G. Carballo, J. Rehof and P. Wiederkehr
  Procedia CIRP 104 (2021), pp. 918-923
  DOI: 10.1016/j.procir.2021.11.154

• Stability Performance of a Stochastic Toolpath in Machining
  T. J. Grimm, N. A. Kharat, N. Potthoff, L. Mears and P. Wiederkehr
  ASME International Mechanical Engineering Congress and Exposition (2021): V02AT02A035
  DOI: 10.1115/IMECE2021-69264

• Development of a Contrived Tool Wear Method in Machining
  T. J. Grimm, N. Potthoff, N. A. Kharat and L. Mears  and P. Wiederkehr
  ASME International Mechanical Engineering Congress and Exposition (2021): V02BT02A059
  DOI: 10.1115/IMECE2021-70454

• Evaluation of a novel approach for considering damping effects in a process force model of a geometric physically-based milling simulation
  F. Wöste, T. Siebrecht and P. Wiederkehr
  Procedia CIRP 103 (2021): 188-193
  DOI: https://doi.org/10.1016/j.procir.2021.10.030

• Macroscopic process simulation of surface and profile grinding processes estimating forces for the production of turbine blades
  A. Grimmert and P. Wiederkehr
  Procedia CIRP 102 (2021): 126-131
  DOI: 10.1016/j.procir.2021.09.022

• Minimisation of Pose-Dependent Regenerative Vibrations for 5-Axis Milling Operations
  I. Wilck, A. Wirtz, T. Merhofe, D. Biermann and P. Wiederkehr
  Journal of Manufacturing and Materials Processing
  DOI: https://doi.org/10.3390/jmmp5030099

• Experimental study on macroscopic force modelling for surface grinding processes in aerospace industry
  A. Grimmert and P. Wiederkehr
  Procedia CIRP, 101 (2021)
  DOI: 10.1016/j.procir.2020.11.007

• Deformation Behavior of 42CrMo4 Over a Wide Range of Temperatures and Strain Rates in Split-Hopkinson Pressure Bar Tests
  J. S. Kimm, J. A. Bergmann, F. Wöste, F. Pöhl, P. Wiederkehr and W. Theisen
  Materials Science and Engineering: A (August 2021)
  DOI: https://doi.org/10.1016/j.msea.2021.141953

• Application of interpolation methods for the determination of position-dependent frequency response functions for the simulation of 5-axis milling processes
  I. Wilck, A. Wirtz, D. Biermann and P. Wiederkehr
  Production Engineering
  DOI: https://doi.org/10.1007/s11740-021-01072-0

• Experimental analysis of tilt angle-dependent dynamic properties of a 5-axis milling center
  A. Wirtz, I. Wilck, N. Schmidt, D. Biermann and P. Wiederkehr
  Manufacturing Letters
  DOI: https://doi.org/10.1016/j.mfglet.2021.04.007

• Augmented semantic segmentation for the digitization of grinding tools based on deep learning
  P. Wiederkehr, F. Finkeldey and T. Merhofe
  CIRP Annals, 70 (2021) 1, 297–300
  DOI: 10.1016/j.cirp.2021.04.051

• Modeling of cutting forces in trochoidal milling with respect to wear-dependent topographic changes
  J. A. Bergmann, N. Potthoff, T. Rickhoff and P. Wiederkehr
  Production Engineering - Research and Development (2021)
  DOI: 10.1007/s11740-021-01060-4

• Material defects detection based on in-process measurements in milling of Ti6246 alloy
  D. Pfirrmann, J. Baumann, E. Krebs, D. Biermann and P. Wiederkehr
  Procedia CIRP 99 (2021): 165-170
  DOI: https://doi.org/10.1016/j.procir.2021.03.023

• Fundamental investigations on wear evolution of machining Inconel 718
  N. Potthoff and P. Wiederkehr
  Procedia CIRP 99 (2021): 171-176
  DOI: https://doi.org/10.1016/j.procir.2021.03.024

• Investigation of electrical power consumption of an additive process chain and empirical modelling as feature selection for machine learning algorithms
  B. Ravisankar, E. Jaeger, M. Meißner, A. Wirtz, P. Wiederkehr and C. Rehtanz
  Procedia CIRP, 99 (2021), S. 358-363
  DOI: https://doi.org/10.1016/j.procir.2021.03.103

• Simulationbased analysis of the energy demand within an additive subtractive process chain
  E. Jaeger, B. Ravisankar, A. Wirtz, M. Meißner, C. Rehtanz, D. Biermann and P. Wiederkehr
  Procedia CIRP, 99 (2021), S. 352-357
  DOI: https://doi.org/10.1016/j.procir.2021.03.051

• Investigation of the effect of residual stresses in the subsurface on process forces for consecutive orthogonal cuts
  F. Wöste, J. Kimm, J. A. Bergmann, W. Theisen and P. Wiederkehr
  Production Engineering - Research and Development (2021)
  DOI: 10.1007/s11740-021-01058-y

• Modeling of the Split-Hopkinson-Pressure-Bar experiment with the explicit material point method
  S. F. Maassen, R. Niekamp, J. A. Bergmann, F. Pöhl, J. Schröder and P. Wiederkehr
  Computational Particle Mechanics; April 2021
  DOI: 10.1007/s40571-021-00399-w

• Quicker Evaluation of the Optimum Operating Point
  J. Volke, F. Finkeldey, J. Zarges, P. Wiederkehr and H. Heim
  Kunststoffe international, 3 (2021), 24–27

• Split‐Hopkinson‐Pressure‐Bar simulations using MPM
  S. F. Maassen, R. Niekamp, J. Schröder, P. Wiederkehr and W. Theisen
  Proc. Appl. Math. Mech., 20: e202000288
  DOI: 10.1002/pamm.202000288

2020

• Influence of the Crystallographic Orientation of a Directionally Solidified Nickel-Based Superalloy on Macroscopic Grinding Forces
  A. Grimmert, L. Dankl and P. Wiederkehr
  Proceedings of the Machining Innovations Conference (MIC) 2020
  DOI: 10.2139/ssrn.3722049

• Learning quality characteristics for plastic injection molding processes using a combination of simulated and measured data
  F. Finkeldey, J. Volke, J. Zarges, H. Heim and P. Wiederkehr
  Journal of Manufacturing Processes, 60 (2020), 134–143
  DOI: 10.1016/j.jmapro.2020.10.028

• Learning-Based Prediction of Pose-Dependent Dynamics
  F. Finkeldey, A. Wirtz, T. Merhofe and P. Wiederkehr
  Journal of Manufacturing and Materials Processing, 4 (2020) 3, 85
  DOI: 10.3390/jmmp4030085

• Subsurface Microstructure Evolution and Residual Stress in 42CrMo4 Steel after Single-Pass Pendulum Tests
  J. S. Kimm, F. Pöhl, P. Wiederkehr and W. Theisen
  International Journal of Mechanical Engineering and Robotic Research 9, 8:1073-1080
  DOI: 10.18178/ijmerr.9.8.1072-1080

• Self-optimizing machining systems
  H. Möhring, P. Wiederkehr, K. Erkorkmaz and Y. Kakinuma
  CIRP Annals – Manufacturing Technology 69 (2020) 1: 740-763
  DOI: 10.1016/j.cirp.2020.05.007

• Real-time prediction of process forces in milling operations using synchronized data fusion of simulation and sensor data
  F. Finkeldey, A. Saadallah, P. Wiederkehr and K. Morik
  Engineering Applications of Artificial Intelligence, 94 (2020), 103753
  DOI: 10.1016/j.engappai.2020.103753

• Representation of energy efficiency interdependencies of manufacturing processes on the shop floor level
  M. Meißner, J. Myrzik and P. Wiederkehr
  Procedia CIRP, 88 (2020): 252-257
  DOI: https://doi.org/10.1016/j.procir.2020.05.045

• Design and optimization of energy-efficient milling processes using a geometric physically-based process simulation system
  A. Wirtz, D. Biermann and P. Wiederkehr
  Procedia CIRP, 88 (2020): 270-275
  DOI: https://doi.org/10.1016/j.procir.2020.05.047

• An approach to use sub-surface characteristics for the prediction of process forces during cutting operations
  J. A. Bergmann, J. Kimm, W. Theisen and P. Wiederkehr
  Procedia CIRP, 88 (2020): 276-281
  DOI: 10.1016/j.procir.2020.05.048

• Determination of the dynamic behaviour of micro-milling tools at higher spindle speeds using ball-shooting tests for the application in process simulations
  P. Wiederkehr, I. Wilck and T. Siebrecht
  CIRP Annals – Manufacturing Technology 69 (2020) 2: 97-100
  DOI: https://doi.org/10.1016/j.cirp.2020.04.036

• Experimental setup for analyzing fundamentals of cutting processes using a modular system
  F. Wöste, J. Baumann, J. A. Bergmann, R. Garcia-Carballo and P. Wiederkehr
  Modern Machinery (MM) Science Journal, March 2020: 3754-3758
  DOI: 10.17973/MMSJ.2020_03_2020004

• Geometric Physically-Based and Numerical Simulation of NC-Grinding Processes for the Calculation of Process Forces
  F. Wöste, T. Siebrecht, M. Fast and P. Wiederkehr
  Procedia CIRP, 86 (2019): 133-138
  DOI: 10.1016/j.procir.2020.01.022

2019

• Analytical and Simulation-Based Prediction of Surface Roughness for Micromilling Hardened HSS
  A. Meijer, J. A. Bergmann, E. Krebs, D. Biermann and P. Wiederkehr
  Journal of Manufacturing and Materials Processing, 3 (2019) 3, p. 70
  DOI: 10.3390/jmmp3030070

• Analysis and simulation of process damping in HPC milling
  F. Wöste, J. Baumann, P. Wiederkehr and T. Surmann
  Production Engineering, 13 (2019): 607–616
  DOI: 10.1007/s11740-019-00912-4

• Surface structuring using multi-stage grinding strategies based on geometric physically-based process simulations
  T. Siebrecht, N. Potthoff, P. Wiederkehr and D. Biermann
  Procedia Manufacturing 29 (2019): 608-615
  DOI: 10.1016/j.promfg.2019.02.095

• Multi-level simulation concept for multidisciplinary analysis and optimization of production systems
  T. Delbrügger, M. Meißner, A. Wirtz, D. Biermann, J. Myrzik, J. Rossmann and P. Wiederkehr
  The International Journal of Advanced Manufacturing Technology

• Learning Ensembles in the Presence of Imbalanced Classes
  A. Saadallah, N. Piatkowski, F. Finkeldey, P. Wiederkehr and K. Morik
  Proceedings of the 8th International Conference on Pattern Recognition Applications and Methods - Volume 1: ICPRAM, 866–873
  DOI: 10.5220/0007681508660873

• Representation of energy efficiency of energy converting production processes by Process Status Indicators
  M. Meißner, L. Massalski, A. Wirtz, P. Wiederkehr and J. Myrzik
  Procedia CIRP 79 (2019). S. 221-226
  DOI: /10.1016/j.procir.2019.02.052

• Evaluation of cutting processes using geometric physically-based process simulations in view oft he electric power consumption of machine tools
  A. Wirtz, M. Meißner, P. Wiederkehr, D. Biermann and J. Myrzik
  Procedia CIRP 79 (2019). S. 602-607
  DOI: /10.1016/j.procir.2019.02.083

• The effect of runout errors on process forces and tool wear
  J. Baumann, T. Siebrecht, P. Wiederkehr and D. Biermann
  Procedia CIRP, 79 (2019), S. 39–44
  DOI: 10.1016/j.procir.2019.02.008

• Trochoidal milling: investigation of dynamic stability and time domain simulation in an alternative path planning strategy
  F. A. Niaki, A. Pleta, L. Mears, N. Potthoff, J. A. Bergmann and P. Wiederkehr
  The International Journal of Advanced Manufacturing Technology (2018): 1-16
  DOI: 10.1007/s00170-018-03280-y

2018

• Modeling of process deflections in a point-based grinding simulation system
  T. Siebrecht, N. Potthoff, P. Wiederkehr and D. Biermann
  Procedia Manufacturing, 18 (2018), S. 104-111
  DOI: 10.1016/j.promfg.2018.11.014

• An interdisciplinary view on the formulation of a process force model for milling processes
  J. Kimm, J. A. Bergmann, S. Kugai, J. Schröder, W. Theisen and P. Wiederkehr
  Materials Chain International Conference 2018

• Deformation behaviour and chip formation processes of tempering steel under high-speed deformation and high temperature: a microstructural analysis
  J. Kimm, J. A. Bergmann, S. Kugai, F. Pöhl, P. Wiederkehr and W. Theisen
  Sino-German Summer School 2018 (chinesich-deutsches Zentrum für Wissenschaftsförderung)

• Stochastic modeling of grain wear in geometric physically-based grinding simulations
  P. Wiederkehr, T. Siebrecht and N. Potthoff
  CIRP Annals -- Manufacturing Technology, 67 (2018) 1, S. 325-328
  DOI: 10.1016/j.cirp.2018.04.089

• Stability prediction in milling processes using a simulation-based Machine Learning approach
  A. Saadallah, F. Finkeldey, K. Morik and P. Wiederkehr
  Procedia CIRP, 72 (2018), 1493–1498
  DOI: 10.1016/j.procir.2018.03.062

• Point-based tool representations for modeling complex tool shapes and runout for the simulation of process forces and chatter vibrations
  P. Wiederkehr, T. Siebrecht, J. Baumann and D. Biermann
  Advances in Manufacturing

• Simulation-based design of milling-processes - Sensitivity analysis of stability lobe diagrams for automotive large-scale production
  J. Rempel, P. Jacobi, J .Friedrich, A. Verl, P. Wiederkehr and D. Biermann
  WT Werkstattstechnik 107 (11-12), 841-846

• Simulation of surface structuring considering the acceleration behaviour by means of spindle control
  D. Freiburg, F. Finkeldey, M. Hensel, P. Wiederkehr and D. Biermann
  International Journal of Mechatronics and Manufacturing Systems, 11 (2018) 1, 67–86
  DOI: 10.1504/IJMMS.2018.091178

• Simulation-assisted investigation of the electric power consumption of milling processes and machine tools
  A. Wirtz, M. Meißner, P. Wiederkehr and J. Myrzik
  Procedia CIRP 67 (2018) S. 87-92
  DOI: https://doi.org/10.1016/j.procir.2017.12.181

• An integrated macroscopic model for simulating SLM and milling processes
  P. Wiederkehr and J. A. Bergmann
  Production Engineering. Research and Development 12(2018) 3
  DOI: 10.1007/s11740-018-0822-3

• Prediction of Feed-Rate Slowdowns in Precise Micromilling Processes
  A. Meijer, E. Krebs, P. Wiederkehr and D. Biermann
  Journal of Manufacturing and Materials Processing 2(2018) 1, 19
  DOI: 10.3390/JMMP2010019

2017

• Stochastische Modellierung von Kornverteilungen beim Microfinishen mit deterministischen Finishbändern
  T. Siebrecht, M. Tilger, T. T. Dereli, M. Kipp, F. Finkeldey, J. A. Bergmann, S. Schumann, D. Biermann and P. Wiederkehr
  4. Fachtagung "Sensitive Fertigungstechnik", Magdeburg, H. Goldau (Hrsg), R. Stolze (Hrsg), Shaker Verlag, ISBN 978-3-8440-6397-4, (2017), 167–174

• Tool wear-dependent process analysis by means of a statistical online monitoring system
  F. Finkeldey, S. Hess and P. Wiederkehr
  Production Engineering, 11 (2017), 1–10
  DOI: 10.1007/s11740-017-0773-0

• Improvement strategies for the formfilling in incremental gear forming processes
  P. Sieczkarek, S. Wernicke, S. Gies, A. E. Tekkaya, E. Krebs, P. Wiederkehr, D. Biermann, W. Tillmann and D. Stangier
  Production Engineering. Research and Development 2017, S. 1-9

• Intelligente Werkzeuge, Spannsysteme und Prozessregelungen
  P. Wiederkehr and H. Möhring
  industrie 4.0 area 2017, konradin Industrie, S. 18

• Modelling, Simulation and Compensation of Thermomechanically Induced Material Deformation in Dry NC Milling Processes
  T. Siebrecht, P. Wiederkehr, A. Zabel, M. Schweinoch, A. Byfut and A. Schröder
  In: Biermann D., Hollmann F. (eds) Thermal Effects in Complex Machining Processes. Lecture Notes in Production Engineering.Springer, S. 289-320
  DOI: In: Biermann D., Hollmann F. (eds) Thermal Effects in Complex Machining Processes. Lecture Notes in Production Engineering.

• Methodology
  P. Kolar, H. Möhring and P. Wiederkehr
  Intelligent Fixtures for the Manufacturing of Low Rigidity Components. Lecture Notes in Production Engineering, Springer, S. xix-xxx

• Detection and Compensation of Workpiece Distortions During Machining of Slender and Thin-Walled Aerospace Parts
  H. Möhring, P. Wiederkehr, M. Leopold, R. Hense and F. Hannesen
  Intelligent Fixtures for the Manufacturing of Low Rigidity Components. Lecture Notes in Production Engineering, Springer, S. 59-79

• Identification and Active Damping of Critical Workpiece Vibrations in Milling of Thin Walled Workpieces
  H. Möhring, P. Wiederkehr, C. Lerez, T. Siebrecht and H. Schmitz
  Intelligent Fixtures for the Manufacturing of Low Rigidity Components. Lecture Notes in Production Engineering, Springer, S. 3-23

• Enhanced corrosion resistance of magnesium alloys by transplantation of thermally sprayed coatings
  J. R. Diaz, P. Knödler, M. Otten, K. Möhwald, D. Freiburg, P. Kersting and D. Biermann
  In: ITSC 2017. DVS-Berichte, Band: 336. DVS Media GmbH, Düsseldorf, 2017, S. 665–668

• Mit Virtual Machining Prozesse optimieren
  A. Wirtz and P. Wiederkehr
  NC-Fertigung, 05 (2017), S. 26-29

• Virtual Machining – Potentiale und Herausforderungen von Prozesssimulationen für Industrie 4.0
  P. Wiederkehr, T. Siebrecht and J. Baumann
  In: Wissenschaftsforum – Intelligente Technische Systeme (WInTeSys) 2017, E. Bodden, F. Dresslr, R. Dumitrescu, J. Gausemeier, F. Meyer auf der Heide, C. Scheytt, A. Trächtler Hrsg.) Verlagsschriftenreihe des Heinz Nixdorf Instituts, and 369 , (2017), S. 269-279

• Modelling the Dynamic Behavior of a Machine Tool Considering the Tool-position-dependent Change of Modal Parameters in a Geometric-kinematic Simulation System
  J. Baumann, T. Siebrecht and P. Wiederkehr
  Procedia CIRP, 62 (2017), S. 351-356

• Einfluss der Andrückrollenhärte beim Microfinishen -Analyse der Kontaktbedingungen und der erzielten Oberflächenrauheiten
  D. Biermann, M. Kansteiner, M. Tilger and P. Wiederkehr
  wt Werkstattstechnik online, 107 (2017) 1/2, S. 059-065

• Intelligent hybrid material slide component for machine tools
  H. Möhring, P. Wiederkehr, J. Baumann, A. König, C. Spieker and M. Müller
  Journal of Machine Engineering, 17 (2017) 1, S. 17-30, ISSN 1895-7595 (Print), 2391-8071 (Online)

• Virtuelle Fertigung: Einsatzmöglichkeiten von Prozesssimulationen in der Zerspanung
  P. Wiederkehr and T. Siebrecht
  In: Spanende Fertigung, 7. Ausgabe, D. Biermann (Hrsg.), Vulkan Verlag, Essen, 2017, ISBN 978-3-8027-2989-8 (print), 978-3-8027-3052-8 (ebook), S. 13-18

• Simulationsgestützte Prozessgestaltung von Zerspanprozessen in der Automobilindustrie
  W. Koehler and P. Wiederkehr
  In: Spanende Fertigung, 7. Ausgabe, D. Biermann (Hrsg.), Vulkan Verlag, Essen, 2017, ISBN 978-3-8027-2989-8 (print), 978-3-8027-3052-8 (ebook), S. 436-443

• Endbearbeitung hartstoffbeschichteter Freiformflächen im Werkzeug- und Formenbau
  S. Rausch, P. Wiederkehr and D. Biermann
  In: Spanende Fertigung, 7. Ausgabe, D. Biermann (Hrsg.), Vulkan Verlag, Essen, 2017, ISBN 978-3-8027-2989-8 (print), 978-3-8027-3052-8 (ebook), S. 247-254

• Konzept zur Online-Adaption von Simulationsparametern an Sensordaten mithilfe empirischer Modelle
  F. Finkeldey, S. Hess and P. Wiederkehr
  In: Spanende Fertigung, 7. Ausgabe, D. Biermann (Hrsg.), Vulkan Verlag, Essen, ISBN 978-3-8027-2989-8 (print), 978-3-8027-3052-8 (ebook), (2017), 462–471

2016

• Virtual Machining: Capabilities and Challenges of Process Simulations in the Aerospace Industry
  P. Wiederkehr and T. Siebrecht
  Procedia Manufacturing, 6 (2016), S. 80-87

• Aktive Schwingungskompensation bei der Bearbeitung dünnwandiger Bauteile
  H. Möhring, C. Lerez and P. Wiederkehr
  In: Smarte Strukturen und Systeme. Tagungsbad des 4SMARS-Symposiums, 6.-7. April 2016, Darmstadt, T. Melz, M. Wiedemann (Hrsg.), De Gruyter, Oldenburg, 2016, S. 44-45

• Elaborated analysis of force model parameters in milling simulations with respect to tool state variations
  S. Hess, F. Finkeldey and P. Wiederkehr
  Procedia CIRP, 55 (2016), 83–88
  DOI: 10.1016/j.procir.2016.08.044

• Intelligent components for self-optimizing machine tools – basis for Industrie 4.0
  H. Möhring and P. Wiederkehr
  In: Adaptive and Smart Manufacturing. Wiener Produktionstechnik Kongress, Band 3, new academic press, Friedrich Bleicher (Hg.), 2016, S. 83-94

• Workpiece Fixture: Important Element For Improving Manufacturing Productivity And Accuracy Of Low Rigidity Components
  P. Kolar, H. Möhring, P. Wiederkehr and J. Sveda
  HSM 2016 – XIIIth International Conference on High Speed Machining, 3.-5. Oktober, Metz, Frankreich, (2016)

• Thermal effects on machine tool compliance
  J. Baumann, R. Hense, P. Wiederkehr, L. Nguyen, H. Möhring, C. Spieker and M. Müller
  HSM 2016 – XIIIth International Conference on High Speed Machining, 3.-5. Oktober, Metz, Frankreich, (2016)

• Simulation of workpiece vibrations in spindle direction during milling
  R. Hense, T. Siebrecht and P. Wiederkehr
  Advanced Materials Research, 1140 (2016), S. 213-220
  DOI: 10.4028/www.scientific.net/AMR.1140.213

• Prozessdynamik und Maschinentemperatur - Simulative Analyse des Einflusses der Umgebungstemperatur auf das dynamische Verhalten von Werkzeugmaschinen
  J. Baumann, R. Hense and P. Wiederkehr
  wt Werkstattstechnik online Jahrgang 106 H. 7/8, Springer-VDI-Verlag, Düsseldorf, (2016), S. 506-511

• Wear Behavior of Tribologically Optimized Tool Surfaces for Incremental Forming Processes
  P. Sieczkarek, S. Wernicke, S. Gies, E. Tekkaya, E. Krebs, P. Wiederkehr, D. Biermann, W. Tillmann and D. Stangier
  Tribology International, 104 (2016), S. 64-72
  DOI: 10.1016/j.triboint.2016.08.028

• Dynamische Kenngrößen im Fräsprozess gezielt nutzen
  S. Hess, F. Finkeldey and P. Wiederkehr
  MM Maschinenmarkt, (2016), 44–45

• Sensor Integrated CFRP Structures for Intelligent Fixtures
  H. Möhring, P. Wiederkehr, C. Lerez, H. Schmitz, H. Goldau and C. Czichy
  3rd International Conference on System-integrated Intelligence: New Challenges for Product and Production Engineering, SysInt, Procedia Technology, 26 (2016), S. 120-128

• Intelligent Fixtures for High Performance Machining
  H. Möhring and P. Wiederkehr
  Procedia CIRP, 46 (2016), S. 383-390
  DOI: 10.1016/j.procir.2016.04.042

• Machine Hammer Peening of Wear Resistant Thermally Sprayed Coatings
  S. Rausch, P. Wiederkehr and D. Biermann
  In: Proceedings of the 12th International Conference THE “A” Coatings 2016, 31.3.-1.4. 2016, ISBN 978-3-95900-072-7, S. 115-121

• Influence of Machine Hammer Peening on the Tribological Behavior and the Residual Stresses of Wear Resistant Thermally Sprayed Coatings
  S. Rausch, P. Wiederkehr, D. Biermann, A. Zabel, U. Selvadurai, L. Hagen and W. Tillmann
  Procedia CIRP, 45 (2016), S. 275-278
  DOI: 10.1016/j.procir.2016.02.059

• Experimental and numerical analysis of tribological effective surfaces for forming tools in Sheet-Bulk Metal Forming
  P. Kersting, D. Gröbel, M. Merklein, P. Sieczkarek, S. Wernicke, A. Tekkaya, E. Krebs, D. Freiburg, D. Biermann, T. Weikert, S. Tremmel, D. Stangier, W. Tillmann, S. Matthias, E. Reithmeier, M. Löffler, F. Beyer and K. Willner
  Production Engineering. Research and Development, (2016), S. 1-14
  DOI: 10.1007/s11740-015-0651-6

• Simulation Aided Design of Intelligent Machine Tool Components
  H. Möhring, P. Wiederkehr, M. Leopold, L. Nguyen, R. Hense and T. Siebrecht
  Journal of Machine Engineering, 16 (2016) 3, S. 5-33, ISSN 1895-7595

• Einsatzmöglichkeiten von Prozesssimulationen in der spanenden Fertigung
  P. Wiederkehr, J. Baumann, F. Finkeldey, D. Freiburg, R. Hense, S. Hess and T. Siebrecht
  In: "KMU 4.0" Intelligente Fertigungstechnologie für kleine und mittelständische Unternehmen, Fertigungstechnisches Kolloquium Magdeburg, ISBN 978-3-944722-36-8, (2016)

2015

• Tribologische Untersuchung bionischer und mikrostrukturierter Funktionsflächen
  W. Tillmann, D. Stangier, L. Hagen, D. Biermann, P. Kersting and E. Krebs
  Materialwissenschaft und Werkstofftechnik, 46 (2015) 11, S. 1096-1104
  DOI: 10.1002/mawe.201500434

• Modeling of Surface Location Errors in a Multi-scale Milling Simulation System Using a Tool Model Based on Triangle Meshes
  T. Siebrecht, P. Kersting, D. Biermann, S. Odendahl and J. Bergmann
  Procedia CIRP, 37 (2015), S. 188-192
  DOI: 10.1016/j.procir.2015.08.064

• Intelligente Werkstückspannsysteme für die verzugsfreie Fertigung dünnwandiger Aluminiumbauteile
  M. Leopold, R. Hense, H. Möhring and P. Kersting
  In: Tagungsband 12. Magdeburger Maschinenbau-Tage, 30.9.-1.10. 2015

• Entwicklung eines intelligenten Werkstückhalters für die Fertigung dünnwandiger Bauteile
  C. Lerez, T. Siebrecht, H. Möhring and P. Kersting
  In: Tagungsband 12. Magdeburger Maschinenbau-Tage, 30.9.-1.10. 2015

• Wear behavior of bio-inspired and technologically structured HVOF sprayed NiCrBSiFe coatings
  W. Tillmann, L. Hagen, D. Stangier, I. Laemmerhirt, D. Biermann, P. Kersting and E. Krebs
  Surface & Coatings Technology, 280 (2015), S. 16-26
  DOI: 10.1016/j.surfcoat.2015.08.055

• Model-based Investigation of Thermal Loading in Milling Processes Including Chatter
  M. Schweinoch, R. Joliet, P. Kersting and A. Zabel
  Procedia CIRP, 35 (2015), S. 85-90
  DOI: 10.1016/j.procir.2015.08.073

• Analysis of Residual Stress States of Structured Surfaces Manufactured by High-Feed and Micromilling
  H. Lucas, B. Denkena, T. Grove, E. Krebs, P. Kersting, D. Freiburg and D. Biermann
  HTM Journal of Heat Treatment and Materials, 70 (2015) 4, S. 183-189
  DOI: 10.3139/105.110265

• Determination of Force Parameters for Milling Simulations by Combining Optimization and Simulation Techniques
  D. Freiburg, R. Hense, P. Kersting and D. Biermann
  Journal of Manufacturing Science and Engineering, (2015)
  DOI: 10.1115/1.4031336

• Intelligente Vorrichtungen zur Verbesserung von Fräsprozessen
  D. Biermann, P. Kersting, H. Möhring, T. Siebrecht and J. Baumann
  Unter Span, 1 (2015), S. 20

• NC-Formschleifen von hartstoffbeschichten Tiefziehwerkzeugen
  S. Rausch, P. Kersting and D. Biermann
  Diamond Business, (2015) 2, S. 10-17

• Modeling and simulative analysis of the micro-finishing process
  P. Kersting, R. Joliet and M. Kansteiner
  CIRP Annals - Manufacturing Technology, 64 (2015) 1, S. 321-324
  DOI: 10.1016/j.cirp.2015.04.014

• Simulation and Structuring of Complex Surface Areas using High Feed Milling
  D. Freiburg, P. Kersting and D. Biermann
  In: 8th International Conference And Exhibition on Design and Production of Machines And Dies/Molds, 18.6.-21.6. 2015, Kusadasi, Aydin, Turkey, S. 93-98

• Determination of the Thermal Load Distribution in Internal Traverse Grinding using a Geometric-Kinematic Simulation
  S. Schumann, T. Siebrecht, P. Kersting, D. Biermann, R. Holtermann and A. Menzel
  Procedia CIRP, (2015)

• Simulation of an Active Fixture System for Preventing Workpiece Vibrations during Milling
  R. Hense, J. Baumann, T. Siebrecht, P. Kersting, D. Biermann and H. Möhring
  In: Proceedings of the 4th International Conference on Virtual Machining Process Technology (VMPT 2015), 2.6.-5.6. 2015

• Festklopfen von thermisch gespritzten Hartstoffschichten
  D. Biermann, P. Kersting and S. Rausch
  FORM + Werkzeug, (2015) 3, S. 22-23

• Heat input modeling and calibration in dry NC-milling processes
  M. Schweinoch, R. Joliet, P. Kersting and A. Zabel
  Production Engineering. Research and Development, 9 (2015) 4, S. 495-504, ISSN 0944-6524
  DOI: 10.1007/s11740-015-0621-z

• Modeling and Optimization of Machining Problems
  D. Biermann, P. Kersting, T. Wagner and A. Zabel
  In: Springer Handbook of Computational Intelligence, 2015, ISBN 978-3-662-43504-5, S. 1173-1184
  DOI: 10.1007/978-3-662-43505-2

• A Testpart for Interdisciplinary Analyses in Micro Production Engineering
  H. Möhring, P. Kersting, S. Carmignato, J. Yagüe-Fabra, M. Maestro, R. Jiménez, E. Ferraris, L. Tunc, F. Bleicher, W. Wits, K. Walczak and M. Hedlind
  Procedia CIRP, 28 (2015), S. 106-112
  DOI: 10.1016/j.procir.2015.04.018

• A process Model for Force-controlled Honing Simulations
  R. Joliet, M. Kansteiner and P. Kersting
  Procedia CIRP, 28 (2015), S. 46-51
  DOI: 10.1016/j.procir.2015.04.009

• Modelling and simulation of Internal Traverse Grinding: bridging meso- and macro-scale simulations
  R. Holtermann, A. Menzel, S. Schumann, D. Biermann, T. Siebrecht and P. Kersting
  Production Engineering, 9 (2015) 4, S. 451-463, ISSN 0944-6524
  DOI: 10.1007/s11740-015-0613-z

• Simulation of Self-Excited and Forced Workpiece Vibrations during Milling for the Design of Chatter-Impeding Fixture Systems
  R. Hense, T. Siebrecht, J. Baumann and P. Kersting
  In: International Conference on Advances in Vibrations 2015 – Conference proceedings, 30.3.-1.4. 2015, University of Porto in Porto, Portugal

• Analysing Machining Errors Resulting from a Micromilling Process using CT Measurement and Process Simulation
  P. Kersting, S. Carmignato, S. Odendahl, F. Zanini, T. Siebrecht and E. Krebs
  In: Proceedings of the 4M/ICOMM2015 Conference, 31.3.-2.4. 2015, A. Annoni, I. Fassi, G.J. Wiens, S. Dimov (Hrsg.), ISBN 978-981-09-4609-8, S. 137-140
  DOI: 10.3850/978-981-09-4609-8_034

• Experimental verification of a benchmark forming simulation
  P. Landkammer, A. Loderer, E. Krebs, E. Söhngen, P. Steinmann, T. Hausotte, P. Kersting and D. Biermann
  Key Engineering Materials, 639 (2015), S. 251-258

• Experimentelle Verifizierung eines Benchmark-Umformprozesses
  P. Landkammer, B. Söhngen, A. Loderer, E. Krebs, P. Steinmann, K. Willner, T. Hausotte, P. Kersting and D. Biermann
  In: Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung 2015 - DFG Transregio 73, 26.2.-27.2. 2015, A. E. Tekkaya, M. Liewald, M. Merklein, B.-A. Behrens (Hrsg.), ISBN 978-3-8440-3434-9, S. 91-11

• High-feed milling of tailored surfaces for sheet-bulk metal forming tools
  R. Hense, C. Wels, P. Kersting, U. Vierzigmann, M. Löffler, D. Biermann and M. Merklein
  Production Engineering. Research and Development, 9 (2015) 2, S. 215-223
  DOI: 10.1007/s11740-014-0597-0

• Predicting Thermal Loading in NC-Milling Processes
  M. Schweinoch, R. Joliet and P. Kersting
  Production Engineering. Research and Development, 9 (2015) 2, S. 179-186
  DOI: 10.1007/s11740-014-0598-z

2014

• Potentiale geometrisch-physikalischer Prozesssimulationen zur Modellierung und Optimierung spanender Fertigungsverfahren
  P. Kersting, J. Baumann, R. Joliet, E. Krebs, S. Odendahl, S. Rausch, M. Schweinoch and T. Siebrecht
  In: Begleitband zum Fertigungstechnischen Kolloquium Magdeburg – Moderne Fertigungstechnologien zur Steigerung von Leistung, Qualität und Effizienz, 2.12.-3.12. 2014, ISBN 978-3-944722-20-7

• Analysis and Simulation of Surface Topographies in Grinding of Thermally Sprayed Coatings
  S. Rausch, T. Siebrecht, P. Kersting and D. Biermann
  Advanced Materials Research, 1018 (2014), S. 91-98
  DOI: 10.4028/www.scientific.net/AMR.1018.91

• Virtual process systems for part machining operations
  Y. Altintas, P. Kersting, D. Biermann, E. Budak, B. Denkena and I. Lazoglu
  CIRP Annals - Manufacturing Technology, 63 (2014) 2, S. 585–605
  DOI: 10.1016/j.cirp.2014.05.007

• Die Mitarbeiter des Institutes für Spanende Fertigung an der Technischen Universität Dortmund forschen an den gegenwärtigen und zukünftigen Herausforderungen der Zerspanung im modernen Produktionsprozess
  D. Biermann, P. Kersting, R. Aßmuth and I. Iovkov
  Forschungsreport SS 2014 für den Maschinenbau in Nordrhein-Westfalen, (2014), S. 24-28, ISSN 2198-395X

• Entwicklung stabiler Hochleistungsprozesse - Simulation und Steuerungssoftware bringen Leistungsschub
  D. Freiburg, M. Hayler, P. Kersting and W. Kirsten
  WB - Werkstatt und Betrieb, (2014) 7-8, S. 36-39

• Improving the Cutting Conditions in the Five-axis Micromilling of Hardened High-speed Steel by Applying a Suitable Tool Inclination
  E. Krebs and P. Kersting
  Procedia CIRP, 14 (2014), S. 366-370
  DOI: 10.1016/j.procir.2014.03.032

• Simulation der NC-Fräsbearbeitung – Multiskaliger Ansatz für eine effiziente und flexible Simulation
  S. Odendahl, S. Joliet, P. Kersting, D. Biermann and A. Zabel
  WB – Werkstatt und Betrieb, 147 (2014) 6, S. 78-81

• Development and Analysis of Microstructures for the Transplantation of Thermally Sprayed Coatings
  D. Freiburg, D. Biermann, A. Peuker, P. Kersting, H. Maier, K. Möhwald, P. Knödler and M. Otten
  Procedia CIRP, 14 (2014), S. 245–250
  DOI: 10.1016/j.procir.2014.03.054

• Interpolation Method for the Oscillator-Based Modeling of Workpiece Vibrations
  T. Siebrecht, S. Odendahl, R. Hense and P. Kersting
  In: Proceedings of the 3rd International Conference on Virtual Machining Process Technology, 20.5.-23.5. 2014, Calgary, Canada

• Five-axis grinding of wear-resistant, thermally sprayed coatings on free-formed surfaces
  S. Rausch, D. Biermann and P. Kersting
  Production Engineering. Research and Development, 8 (2014) 4, S. 423-429
  DOI: 10.1007/s11740-014-0537-z

• Grinding process simulation of free-formed WC-Co hard material coated surfaces on machining centers using poisson-disk sampled dexel representations
  T. Siebrecht, S. Rausch, P. Kersting and D. Biermann
  CIRP Journal of Manufacturing Science and Technology, 7 (2014)
  DOI: 10.1016/j.cirpj.2014.01.001

• Simulation of grinding processes using finite element analysis and geometric simulation of individual grains
  T. Siebrecht, D. Biermann, H. Ludwig, S. Rausch, P. Kersting, H. Blum and A. Rademacher
  Production Engineering. Research and Development, (2014)
  DOI: 10.1007/s11740-013-0524-9

• Modeling techniques for simulating workpiece deflections in NC milling
  P. Kersting and D. Biermann
  CIRP Journal of Manufacturing Science and Technology, 7 (2014) 1, S. 48-54
  DOI: 10.1016/j.cirpj.2013.08.002

2013

• Untersuchung von Tailored Surfaces für die Blechmassivumformung mittels angepasstem Ringstauchversuch
  U. Vierzigmann, T. Schneider, J. Koch, D. Groebel, M. Merklein, U. Engel, R. Hense, D. Biermann, E. Krebs, P. Kersting, H. Lucas, B. Denkena, J. Herper, D. Stangier and W. Tillmann
  In: Tagungsband zum 2. Workshop Blechmassivumformung, 13.11. 2013, Erlangen, ISBN 978-3-87525-353-5

• Endbearbeitung von hartstoffbeschichteten freigeformten Funktionsflächen auf Bearbeitungszentren – Prozess und Simulation
  S. Rausch, P. Kersting, S. Odendahl and D. Biermann
  In: Jahrbuch Schleifen, Honen, Läppen und Polieren, 66. Ausgabe, W. Hoffmeister, B. Denkena (Hrsg.), 2013, ISBN 9783802729713

• Friction analysis of thermally sprayed coatings finished by ball burnishing and grinding
  A. Tekkaya, M. Kleiner, D. Biermann, L. Hiegemann, S. Rausch, V. Franzen, L. Kwiatkowski and P. Kersting
  Production Engineering. Research and Development, 7 (2013) 6, S. 601-610
  DOI: 10.1007/s11740-013-0485-z

• Surface finish of wear resistant coatings by grinding – Process, simulation, and application
  D. Biermann, H. Blum, P. Kersting, A. Rademacher, H. Ludwig, S. Rausch and T. Siebrecht
  In: Sonderforschungsbereich 708 Systeme der Blechformteilefertigung - Erzeugung, Modellierung, Bearbeitung - 6. Öffentliches Kolloquium, 15.11. 2013, Dortmund, W. Tillmann, S. Baumann (Hrsg.), ISBN 978-3-86975-086-6, S. 57-69

• Capabilities of a Process Simulation for the Analysis of Five-Axis Milling Processes in the Aerospace Industry
  P. Kersting and S. Odendahl
  In: 18th International Seminar on High Technology, 10.10. 2013, Piracicaba, Brazil, K. Schützer (Hrsg.), S. 26-47

• Simulation of Process Dynamics and Thermal Effects of Milling Operations
  D. Biermann and P. Kersting
  In: 10th International Conference on High Speed Machining, 26.9.-27.9. 2013, Darmstadt, E. Abele, J. Metternich (Hrsg.), S. 184-193

• Simulation of the NC Milling Process for the Prediction and Prevention of Chatter
  S. Odendahl, R. Joliet, E. Ungemach, A. Zabel, P. Kersting and D. Biermann
  In: New Production Technologies in Aerospace Industry, B. Denkena (Hrsg.), Springer Verlag, Cham, 2013, ISBN 978-3-319-01963-5, Kapitel 3, S. 19-25

• Advances in Machining Wear-Resistant Coatings by Grinding and Honing
  S. Goeke, S. Rausch, P. Kersting and D. Biermann
  In: Recent Advances in Abrasives Research, D. Bähre (Hrsg.), Nova Science Publishers, 2013, ISBN 978-1-62808-566-2, Kapitel 8, S. 249-266

• Efficient Spatial and Temporal Modelling of Material Temperatures within Self-reinforced Polypropylene Sheets during IR Radiation
  S. Hess, A. Ries, P. Kersting and H. Heim
  Procedia CIRP, 9 (2013), S. 49-54
  DOI: 10.1016/j.procir.2013.06.167

• Higher Efficiency Modeling of Surface Location Errors by Using a Multi-scale Milling Simulation
  S. Odendahl and P. Kersting
  Procedia CIRP, 9 (2013), S. 18-22
  DOI: 10.1016/j.procir.2013.06.161

• Validation of a Heat Input Model for the Prediction of Thermomechanical Deformations during NC Milling
  R. Joliet, A. Byfut, P. Kersting, A. Schröder and A. Zabel
  Procedia CIRP, 8 (2013), S. 402-407
  DOI: 10.1016/j.procir.2013.06.124

• Innovative tools to improve incremental bulk forming processes
  P. Sieczkarek, L. Kwiatkowski, A. Tekkaya, E. Krebs, P. Kersting, W. Tillmann and J. Herper
  Key Engineering Materials, 554-557 (2013), S. 1490-1497
  DOI: 10.4028/www.scientific.net/KEM.554-557.1490

• Oscillator-based approach for modeling process dynamics in NC milling with position- and time-dependent modal parameters
  D. Biermann, T. Surmann and P. Kersting
  Production Engineering. Research and Development, 7 (2013) 4, S. 417–422
  DOI: 10.1007/s11740-013-0454-6

2012

• Modellierung dynamikbedingter Effekte während der NC-Fräsbearbeitung dünnwandiger Bauteile
  In: Spanende Fertigung, 6. Ausgabe, D. Biermann (Hrsg.), Vulkan Verlag, Essen, 2012, ISBN 978-3-8027-2965-2, S. 42-50

• Modeling workpiece dynamics using sets of decoupled oscillator models
  P. Kersting and D. Biermann
  Machining Science and Technology, 16 (2012) 4, S. 564-579
  DOI: 10.1080/10910344.2012.731948

• Surface integrity depending on the machining process
  C. Rautert, H. Abrahams, S. Schumann, S. Rausch, S. Kansteiner, S. Goeke and P. Kersting
  In: 1st International Autumn School, 15.10.-19.10. 2012, Faculty of Mechanical Engineering University of West Bohemia Czech Republic, digital veröffentlicht

• Simulation-based prediction of process forces for grinding free-formed surfaces on machining centers
  S. Rausch, S. Odendahl, P. Kersting, D. Biermann and A. Zabel
  Procedia CIRP, 4 (2012), S. 161-165
  DOI: 10.1016/j.procir.2012.10.029

• Simulation-Based Analysis and Intuitive Visualization of the Cutting Edge Load in Micromilling of Hardened Steel
  P. Kersting, D. Biermann and E. Krebs
  Engineering, 4 (2012) 9, S. 532-539
  DOI: 10.4236/eng.2012.49068

• Modeling Techniques for the Prediction of Workpiece Deflections in NC Milling
  P. Kersting and D. Biermann
  Procedia CIRP, 2 (2012), S. 83-86
  DOI: 10.1016/j.procir.2012.05.045

• Using NC-path deformation for compensating tool deflections in micromilling of hardened steel
  D. Biermann, E. Krebs, A. Sacharow and P. Kersting
  Procedia CIRP, 1 (2012), S. 132-137
  DOI: 10.1016/j.procir.2012.04.022

• Simulation dynamikbedingter Effekte während der NC-Fräsbearbeitung dünnwandiger Bauteile
  In: Begleitband zum Fachgespräch zwischen Industrie und Hochschule „Zerspanen im modernen Produktionsprozess – 40 Jahre ISF“, 27.3.-28.3. 2012, Dortmund, D. Biermann (Hrsg.), ISBN 978-3-9808-718-7-7, S. 81-91

2011

• Intelligent process planning methods for the manufacturing of moulds
  D. Biermann, A. Zabel, T. Michelitsch and P. Kersting
  International Journal of Computer Applications in Technology, 40 (2011) 1/2, S. 64-70
  DOI: 10.1504/IJCAT.2011.038551

• Simulation und Analyse regenerativer Werkstückschwingungen bei der NC-Fräsbearbeitung von Freiformflächen
  Dissertation, Technische Universität Dortmund, Vulkan Verlag, Essen, 2011, ISBN 978-3-8027-8757-7

2010

• A general approach to simulating workpiece vibrations during five-axis milling of turbine blades
  D. Biermann, P. Kersting and T. Surmann
  CIRP Annals - Manufacturing Technology, 59 (2010) 1, S. 125-128
  DOI: 10.1016/j.cirp.2010.03.057

• A measuring device for experimental modal analysis of thin-walled workpieces on five-axis milling machines
  P. Kersting, D. Biermann and A. Peuker
  International Journal of Material Forming, 3 (2010) Supplement, S. 451-454
  DOI: 10.1007/s12289-010-0804-2

• A measuring device for experimental modal analysis of thin-walled workpieces on five-axis milling machines
  P. Kersting, D. Biermann and A. Peuker
  In: ESAFORM 2010 - The 13th International ESAFORM Conference on Material Forming, 7.4.-9.4. 2010, University of Brescia, Italy, E. Ceretti, C. Giardini (Hrsg.), digital veröffentlicht

2009

• On the Use of Problem-Specific Candidate Generators for the Hybrid Optimization of Multi-Objective Production Engineering Problems
  K. Weinert, A. Zabel, P. Kersting, T. Michelitsch and T. Wagner
  Evolutionary Computation, 17 (2009) 4, S. 527-544
  DOI: 10.1162/evco.2009.17.4.17405

• Simulation concept for predicting workpiece vibrations in five-axis milling
  P. Kersting and D. Biermann
  Machining Science and Technology, 13 (2009) 2, S. 196-209

• Optimizing NC-tool paths for simultaneous five-axis milling based on multi-population multi-objective evolutionary algorithms
  P. Kersting and A. Zabel
  Advances in Engineering Software, 40 (2009) 6, S. 452-463
  DOI: 10.1016/j.advengsoft.2008.04.013

2008

• Mehrkriterielle Optimierung in der spanenden Fertigung
  P. Kersting, T. Michelitsch and T. Wagner
  In: Spanende Fertigung - Prozesse Innovation Werkstoffe, 5. Ausgabe, K. Weinert, D. Biermann (Hrsg.), Vulkan Verlag, Essen, 2008, ISBN 978-3-8027-2943-0, S. 571-583

• Simulation Concept for Predicting Regenerative Workpiece Vibrations in Five-Axis Milling
  D. Biermann and P. Kersting
  In: Proceedings of the 11th CIRP Conference on Modeling of Machining Operations, 16.9.-18.9. 2008, Gaithersburg, MD USA, S. 179-186

• Modeling regenerative workpiece vibrations in five-axis milling. Production Engineering
  K. Weinert, P. Kersting, T. Surmann and D. Biermann
  Research and Development, 2 (2008) 3, S. 255-260

• Intuitive Visualization and Interactive Analysis of Pareto Sets Applied on Production Engineering
  H. Müller, D. Biermann, P. Kersting, T. Michelitsch, C. Begau, C. Heuel, R. Joliet, J. Kolanski, M. Kröller, C. Moritz, D. Niggemann, M. Stöber, T. Stönner, J. Varwig and D. Zhai
  In: Success in Evolutionary Computation, Springer Verlag, Berlin, Heidelberg, 2008, ISBN 978-3-540-76285-0, S. 189-214

2007

• Intelligent Process Planning Methods for the Manufacturing of Molds
  D. Biermann, A. Zabel, T. Michelitsch and P. Kersting
  In: Proceedings of the International Conference on Product Design and Manufacturing Systems (PDMS 2007), 12.10.-15.10. 2007, Chongqing, China

• ICSPEA: Evolutionary Five-Axis Milling Path Optimisation
  J. Mehnen, R. Roy, P. Kersting and T. Wagner
  In: Proceedings of the 9th Annual Genetic and Evolutionary Computation Conference (GECCO-2007), 7.7.-11.7. 2007, London, D. Thierens, et al (Hrsg.), ISBN 978-1-59593-697-4

• Effiziente Kollisionsberechnung optimiert das 5-Achs Fräsen
  K. Weinert and P. Kersting
  MM - Maschinenmarkt, 113 (2007) 4, S. 28-33

• ICSPEA: Integrating CMA-ES and SPEA2
  J. Mehnen, T. Wagner, P. Kersting, I. Tipura and G. Rudolph
  In: Reihe CI 222/07. SFB 531, Universität Dortmund, 2007, ISSN 1433-3325

2006

• Optimizing NC Tool Paths for Five-Axis Milling using Evolutionary Algorithms on Wavelets
  K. Weinert, A. Zabel, H. Müller and P. Kersting
  In: Conference Proceedings Pt. II; Genetic and Evolutionary Computation - GECCO 2006: Genetic and Evolutionary Computation Conference, 2006, Seattle, WA, USA, M. Keijzer, et al (Hrsg.), ISBN 1-59593-186-4, S. 1809-1816

• Improvement of Machine Tool Movements for Simultaneous Five-Axes Milling
  A. Zabel, H. Müller, M. Stautner and P. Kersting
  In: Proceedings of the 5th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering (CIRP ICME '06), 2006, Ischia, Italy, R. Teti (Hrsg.), ISBN 978-88-95028-01-9, S. 159-164